Home Accuenergy Conzerv Crompton Digital-Switchboard Meters To Go Texmate Meters Utility Meters Watthour Meters Wilbac Meters . Alternatives For: Analogic Digitec EIL KEP Modutec Newport Precision Digital Red Lion Simpson Westcon . Current Transformers Switches-Disconnect Switches-Instrument Temp Sensors Transducers Ordering Info Order via  Email Order Fax Quotation Fax

Digital Watt Meters, single phase, 2 and 3 wire systems   The DI Series Kilowatt hour meter is ready to install in a convenient panel cutout size. A DIN style 98x46mm holds the DI50E meter with the IOW2 signal conditioner with a 5 digit accuracy of 0.1%.  This meter is a processor, not a counter, and comes complete with system calibration, 1 solid core current transformer with a 1" window,  any amperage ready for installation.  Works on Wye or Delta systems, neutral not required. On board meter memory holds data even after a power outage, with a large 0.56" display. Re-settable or continuous running for your convenience. Powered by 120VAC standard, DC supply optional These meters require a professional electrician for installation, contact a local, qualified electrician, disconnect power before installing these meters.   DI50E Completely calibrated and configured for your single phase 2 or 3 wire system. Provide Amp service 100-200 400 amp etc. and the system voltage to complete the model number.  Includes 1 solid core CT 1" ID Window. 1ea.DI50E-DP1-PS1-IOW2-(Amps)-(Volts)=$300.00ea. DI50E Data Sheet    Be patient this is 60 pages in PDF   DI503E Single phase Controller Complete Instantaneous system information for a single phase 2 or 3 wire system. Five digit, Triple Display measuring Volt, Amps, Kilowatt hours, Frequency, Watts, Kilowatts, Power Factor, load monitoring  up to 600 VAC. Completely configured  with 3 selectable of 3 primary displays. Provide amp service 100-200 or 400 amp etc. and the system voltage to complete the model number. Includes 1 solid core CT w/1"ID Window. Options include RS232 and RS485 Communications 1ea.DI503E-DR3-PS1-IOW2 (amps)-(Volts) $400.00ea DI-503E Data Sheet    Be patient this is 60 pages in PDF Split Core Current Transformers 1ea. 2SP-(Amps) Split Core type CT   $80.00  Makes installation easy. No power cable to unbuckle. Hook the CT to the meter, hook the CT around the cable. A=.90", B=2.13", C=4.13", E=0.5" 1ea. DC Power Supply    More Split core Details Caution Serious injury can result from electrical shock.  Be sure to turn off the electrical power before installing any meter. Fire can result from loose electrical connections.  Ensure that all electrical connections are secure.  If you do not understand theses instructions hire an experienced electrician to install the meter for you.  Help is also available from the factory buy phone or email.  In most localities a permit and inspection is required to install the meters.