SP-35X, SP-35XMV, LCD Display, Signal Powered DC Volt Meter.Signal powered DC Volt and
Meter with 3.5 digit 0.48” LCD in a Slim Bezel case.
The SP-35X is a signal-powered meter
designed for ease of use. The 2-wire meter is Powered from the signal and
does not require a separate power supply. Input range 5-199VDC. The meter has auto-polarity
indication. The polarity may be disabled or reversed by re-poisoning the
jumper clips an internal header pins.SP-35X Data
Each SP-Series meter is provided with a set of screw terminal
accept bare wire or crimped connectors.
The pin out is designed so that a
standard PCB edge connector
can be used instead of screw terminals