Home
Accuenergy
Conzerv
Crompton
Digital-Switchboard
Meters To Go
Texmate Meters
Utility Meters
Watthour Meters
Wilbac Meters
.
Alternatives For:
Analogic
Digitec
EIL
KEP
Modutec
Newport
Precision Digital
Red Lion
Simpson
Westcon
.
Current Transformers
Switches-Disconnect
Switches-Instrument
Temp Sensors
Transducers
Ordering Info
Order via  Email
Order Fax
Quotation Fax
 
 
 
 
 
Three Phase Switchboard Meter, 3 Line Display.
 
All three phases of Volts, Amps, energy, power, frequency, harmonics and summations. Power monitor and Peak Demand. 30 plus parameters.  $320-  370.00 with communications.
Ideal choice for monitoring and controlling of power distribution system. The electric power parameters available on the ultra-compact Acuvim-L panel meter:          
 True-RMS measuring parameter
 4-quadrant Energy
 Power Quality Analysis
 Clear LCD screen
 Bright Orange Back light   		Acuvim-L(Acuvim-L)
         Installation Manual
Acuvim-L may be used as a data gathering device for an intelligent Power Distribution System or a Plant Automation System. All monitoring data is available via digital RS485 communication port running Modbus RTU Protocol.
 
Power system quality is important with increasing use of electronic loads such as computers, ballasts or variable frequency drives with a simple 3 phase panel meter. The Acuvim-L power analysis option, any phase current or voltage can be displayed and the harmonic content calculated.

By knowing the harmonic distribution, action can be taken to
prevent overheated transformers, motors, capacitors, neutral
wires and nuisance breaker trips. Redistribution of the system
loading can also be determined.
Choose the model number via needed parameters.
Acuvim-AL   $320.00   Standard
Acuvim-BL   $340.00   Digital Pulse , alarm Output
Acuvim-CL   $370.00   Communication
 
Function  Parameter AL BL CL
         
Phase Voltage VL-N, 1, 2, 3 V V V
REAL TIME Line Voltage V L-L, 1-2, 2-3, 3-1 V V V
METERING Current  I1, 2, 3,L-N V V V
Power P1, 2, 3, sum V V V
Reactive Power Q1, 2, 3, sum V V V
Apparent Power Ssum V V V
Power Factor PF1, PF2, PF3, V V V
Load Nature L/C/R L/C/R V V V
         
ENERGY Ep_iimp, p_exp, V V V
ENERGY & REACTIVE ENERGY  Eq_imp, q_exp V V V
DEMAND CURRENT DEMAND Dmd_I1,DDmd_I2 md_II3 V V V
POWER DEMAND Dmd_Psum, md_QQsum V V V
         
Voltage Unbalance U_unbl V V V
POWER Current Unbalance  I_unbl V V V
QUALITY Voltage THD THD_V1, THD_V2, THD_V3, V V V
Current THD THD_I1, THD_I2, THD_I3 V V V
Individual Harmonics 2 nd 15 th (Current/Voltage) V V V
         
Max Current Demand Dmd_I1, I2, I3, max Dmd V V V
Max Power Demand Dmd, Psum, Qsum_max V V V
STATISTICS Max and Min  Voltage   V V V
Max and Min Current   V V V
         
HOUR Running Hour Hour V V V
I/O Energy Pulse Output     V  
Alarm Output     V  
COMMUNICATION RS-4485 MODBUS ®-RTU Protocol     V
         

Acuvim-L Standard Features:

  1. Metering
  2. Voltage V1, V2, V3, V12, V23, V31
  3. Current I1, I2, I3, In
  4. Power P1, P2, P3, Psum
  5. Reactive Power Q1, Q2, Q3, Qsum
  6. Apparent Power Ssum
  7. Frequency F
  8. Power Factor PF1, PF2, PF3, PF
  9. Energy Ep_imp, Ep_exp
  10. Reactive Energy Eq_imp, Eq_exp
  11. Power Quality
  12. Voltage Harmonics 2nd to 15th and THD
  13. Current Harmonics 2nd to 15st and THD
  14. Voltage Imbalance Factor U_unbl
  15. Current Imbalance Factor I_unbl
  16. Max/Min Statistics with Time Stamps
  17. Running Hour

Options Input/Output Power Analysis

Alarm

bulletOne (1) alarm parameter may be set within a specified time interval.
bulletIf indicated parameter is over or    under its setting limit and persists
bulletover the specified time interval, the event will be recorded with time
bulletstamps and trigger the Alarm DO output. The indicated parameter can
bulletbe selected from any of the 31 parameters available.

Pulse Output option

bulletTwo Digital outputs can be configured as pulse output for kWh and kVarh.
bulletThe pulse rate and width can be set.

Communication

bulletRS485, Industry standard Modbus RTU protocol

 

 

 

 

 

 

 

 

 

Hit Counter