Home

Manufactures
Accuenergy
Conzerv
Crompton
Schneider
Sifam
Texmate

Meters
Digital Switchboard
 Digital Transducer  
Electric Meters
Energy Meters
Revenue Grade
Smart Meters
Surplus
Watt-Hour

Relays
Indicating
Non Indicating

Transducers
Indicating
Non Indicating

Transformers
Current
Potential

Switches
Salzer


Ordering
Acuvim II Power Meter, Internet Connection, Data Logging Software.
Optional module allows Emails current-alarm conditions.
Standard TCP/IP browser protocol.
 
 

Acuvim-II fits in ANSI or 96MM DIN Cutout

Multifuntion Power Meter()
The Acuvim II, an inexpensive high-end multifunction power meter with multiple
communication schemes and ports includes RS485 Modbus as standard. Optional
modules for: I/O, digital and analog, Profibus, Ethernet. No special software required,
uses Internal web browsing software.
3 Phase digital switchboard meters. Setup/Logging software included.
 
                            PRICING
Model Signal Supply/Features  Price
Acuvim-II 5A Input AC/DC  $ 495.00
Acuvim-II 5A Input 24VDC  $ 545.00
Acuvim-II 1A Input AC/DC  $ 525.00
Acuvim-IIM 5A Input No Display  $ 395.00
Acuvim-IIE

5A TOU

Data Logging       $795.00
Acuvim-IIE-M 5A Input No Display       $695.00
 
Software Demo available.
Acuvim II Installation Manual
Acuvim II Brochure
Modbus Map.
Communication Hookup Drawings.

eatures:

  • Panel Metering
    • Voltage, Current, Power, Reactive Power, Apparent Power,
             Frequency, Power Factor, Energy, Reactive Energy, Demand
  • Panel Monitoring
    • Power Quality:
    • Voltage Harmonics 2nd to 31st and THD
    • Current Harmonics 2nd to 31st and THD
    • Voltage Crest Factor
    • THFF (TIF)
    • Current K Factor
    • Voltage Unbalance Factor U_unbl
    • Current Unbalance Factor U_unbl
    • Max/Min Statistics with Time Stamps
    • Switch Status
  • Remote Control
  • Alarms
    • The limits of the less than 9 indicated parameters can be set
             with a specified, time interval. If any input of the 9 indicated
             parameters is over or under its setting limit with persisting time
             over specified time interval, the event will be recorded with time
             stamps and trigger the Alarm DO output. The 9 indicatedparameters
             can be any of the following:
             F, V1, V2, V3, Vlnavg, V12, V23, V31, Vllavg, I1, I2, I3, Iavg, In,
             P1, P2, P3, Psum, Q1, Q2, Q3, Qsum, S1, S2, S3, Ssum, PF1, PF
             U_unbl, I_unbl, Dmd_P, Dmd_Q, Dmd_S
  • Ethernet or Profibus Communication
    • 10M/100M self-adaptable, RJ45 Jack Modbus-TCP/IP Protocol
    • HTTP Web page browse Email sending on time interval or on event
    • Profibus-DP/V0 Input Byte (typical): 32 byte Output Byte (typical):
    • 32 Byte EN50170 vol.2 compliance
    • Profibus slave mode, baud rate self-adaptable up to 12M
  • Fexible I/O module
    • Digital Input, Digital Output, Relay Output,
    • Analog Input, Analog Output, Pulse Output
  • 2 Communication Ports
Function    Parameter
Phase Voltage V1, 2, 3
REAL TIME Line Voltage V1-2, 2-3, 3-1
METERING Current  I1, 2, 3,L-N
Power  (Instant KW) P1, 2, 3, sum
Reactive Power Q1, 2, 3, sum
Apparent Power Ssum
Power Factor PF1, F2, F3, F
ENERGY DEMAND ENERGY (KWh) Ep_iimp, p_exp,
REACTIVE ENERGY  Eq_imp, q_exp
Apparent Energy Dmd_I1,DDmd_I2 md_II3
POWER DEMAND Dmd_Psum, md_QQsum
Voltage Imbalance V_unbl
Current Imbalance  I_unbl
POWER QUALITY Voltage THD THD_V1, THD_V2, THD_V3,
Current THD THD_I1, THD_I2, THD_I3
Individual Harmonics 2 nd 31 th (Current and Voltage)
Voltage Crest Factor Crest Factor
TIF THFF
Current K Factor K Factor
STATISTICS Max with Time Stamp  
Min with Time Stamp  
ALARM Over Under Limit Alarm  
COMMUNICATION RS-4485 MODBUS -RTU Protocol
TIME Real Time Clock  
Switch Status (DI) Digital input wet
Power Supply for DI 24VDC
Relay Output (RO) NO, Form A
I/O OPTIONAL Digital Output (DO) Photo -MOS
MODULES Pulse Output (PO) By using DO
Analog Inpit (AI) 0(4)-20mA, 0(1)-5V
Analog Output (AO) 0(4)-20mA, 0(1)-5V
OPTIONAL Ethernet 10M/100M Modbus TCP,HTTP
COMMUNICATIONS   Web page Email
Profibus-DP Profibus-DP/VO
               
Optional Modules meter Supports 3 modules. Analog and Digital I/O, PROFIBUS-DP,
Ethernet, Web based Email.  Digital Switchboard Meter connects to the internet in a heartbeat.
No software required, just an IP address and you are talking to your meter from any lap
or desk top for $675.00.  I/O Outputs Details
Module Name Price Digital  Input
Power
Supply
Digital
Output
Relay Output Analog Input Analog Output
AXM101 $75.00 6 1   2    
AXM102 $80.00 4   2     2
AXM103 $90.00 4     2 2  

COMMUNICATION MODULE OPTIONS

ETHERNET 10M/ 100M Self Adaptable RJ45 jack               Ethernet Module  Data
 AXM-NET Modbus TCP/IP Protocol      
 $135.00 HTTP Web page Browse.  Email sending on time internal or event

AXM-RS485

 Additional RS485 module    

$130.00

     
 PROFIBUS Profibus-DP/VO  Input Byte typical 32byte    
  $145.00 Output Byte typical 32 byte  ENS0170 vol 2 compliance
  Profibus slave mode baud rate self- adaptable up to 12 Meg.